Produtos da Marca Dell



10. Turn off any attached devices and disconnect them from their electrical outlets.

11. Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.

12. Remove the computer cover.

13. Remove the password jumper.

Attach the jumper to only one pin so that you do not lose it.

14. Replace the computer cover.



15. Connect your computer and devices to electrical outlets, and turn them on.

16. If you are prompted to press <F1> to continue, press <F1>.

Back to Contents Page



NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.