Produtos da Marca Dell



The following table shows Memory Information option information.



The following table shows CPU Information option information.



The following table shows Integrated Devices (Legacy Select Options) option information.



The following table shows Power Management option information.



The following table shows System Security option information.



Diskette Drive A:

Displays floppy drive details.

Primary Drive 0:

Displays primary hard drive 0. The default is Auto.

Primary Drive 1:

Displays primary hard drive 1 (if installed). The default is Off.

Secondary Drive 0:

Displays secondary hard drive 0.The default is Auto.

Secondary Drive 1:

Displays secondary hard drive device type. The default is Off.

IDE Drive UDMA:

Turns IDE Drive UDMA on and off. The default is On.

Option

Function

Installed System Memory

Displays the amount of installed system memory.

System Memory Speed

Displays the speed of your system memory.

System Memory Channel Mode

Displays the mode of your system memory.

AGP Aperture

Displays the amount of aperture memory. The default is 128 MB.

Option

Function

Hyper-Threading

Enables Hyper-Threading. The default is Disabled.

CPU Speed

Sets the CPU speed. The default is Normal.

Bus Speed

Displays the bus speed.

Processor 0 ID

Displays processor ID.

Clock Speed

Displays clock speed.

Cache Size

Displays cache size.

Option

Function

Sound

Turns the integrated sound off and on. The default is On.

Network Interface Controller

Turns the network interface controller off and on. The default is On.

Mouse Port

Turns the mouse port off and on. The default is On.

USB Emulation

Turns USB emulation off and on. The default is On.

USB Controller

Turns the USB controller off and on. The default is On.

Serial Port 1

Sets serial port options and turns the port off and on. The default is Auto.

Parallel Port

Displays parallel port settings when <Enter> is pressed. The default mode is PS/2 and the I/O address default is 378h.

Diskette Interface

Sets the floppy drive interface options. The default is Auto.

Primary Video Controller

Sets the primary video controller. The default is AGP.

Option

Function

Suspend Mode

Displays the suspend state used by the computer. The default is S3.

AC Power Recovery

Enables AC power recovery to occur. The default is Off.

Low Power Mode

Minimizes power use when the computer is off. The default is Disabled.

Option

Function

Password

Status

Locks and unlocks the password option. The default is Unlocked.

System

Password

Enables and disables the system password. The default is Not enabled.

Setup Password

Enables and disables the setup password. The default is Not enabled.