Note: Please refill the engine oil conforming to the CHERY’s specifications only to the level
between MIN and MAX marks.
8. Transmission Oil Check
8.1. Oil level check
Shut down the engine and wait for several minutes, and then lift up the vehicle with a jack, unsrew
the oil limiting plug with a torque wrench, and check the transmission oil level. If the distance
between the oil level and filler opening is large, please appropriately refill the transmission oil (until
the oil level increases up to the filler opening), and then tighten the oil limiting plug with a torque
wrench to the specified torque. (The tightening torque of 44Nm for QR513MHA, and tightening
torque of 30Nm for QR512.)
8.2. Method to replace the transmission oil
Shut down the engine and wait for several minutes, and then lift up the vehicle with a jack, unsrew
the refiller plug with a torque wrench, and then carefully unscrew the drain plug and collect the used
transmission oil with a container. In case that the used transmission oil nearly drains away, tighten
the drain plug with a torque wrenchto the specified torque; and then refill the transmission oil
specified by the CHERY Company (until the oil level increases up to the filler opening according to
the specified quantity). Then tighten the refiller plug with a torque wrench to the specified torque.
9. Trouble Diagnosis of Electronic Control System
Please utilize the CHERY Company’s special diagnostic testers X431 and K81/K61 to diagnose the
electronic control system, and the updated version of program of the diagnostic testers is also
required at the same time.
Drain Plug
Oil Limiting Plug
