III. Installation of Crank-Connecting Rod System
The installation order is adverse to that for
disassembly, but care should be taken for the
following matters. 1. Installation of crankshaft thrust
sheet.
When installing the crankshaft thrust sheet, leave
the side with oil groove outwards.
2. Installation of crankshaft front oil seal
2.1 Clear smudge on oil seal seat ring, and then
apply a layer of lubricant on the seat ring.
2.2 Apply a layer of engine lubricant on the oil seal
lip.
2.3 Enclose the new oil seal with lubricant applied
into the special tool. Press the special tool against
the oil seal seat ring and softly strike to compact.
3. Installation of crankshaft rear oil seal
3.1 Clean the oil seal seat ring. Dip engine oil with a
piece of gauze and then use it to clear the impurities
inside the oil seal seat ring.
3.2 Apply a layer of engine oil uniformly on
crankshaft rear oil seal lip and a little engine oil
uniformly on outer ring of oil seal. Envelope the oil
seal onto the special tool and then press it into the
oil seal seat ring.
