Install the J 42069-10 to the crankshaft sprocket with the knurled bolt.17.
Rotate the crankshaft in the engine rotational direction, clockwise using the J 42098 until the lever of the J 42069-10
firmly contacts the water pump pulley flange.
18.
Secure the moveable lever of the tool to the water pump pulley flange.19.
Important: The alignment marks on the timing belt will no longer align with the marks on the camshaft gears after one or
more engine revolutions.
Inspect the alignment of the reference marks on the camshaft gears with the notches on the rear timing belt cover,
as well as the mark on the crankshaft sprocket and oil pump housing.
20.
Important: The reference marks on both sets of the camshaft gears must match exactly with the marks on the J 42069-20
checking gauge.
11 of 16
