5 Locate the free end of the IDE data cable and thread it out through the open drive bay. Do the same with the
power cable and the (optional) audio cable.
6 Connect your (optional) audio cable,
IDE data cable and the power cable
into the back of the drive. Make sure
you correctly align pin 1 of the cable
to pin 1 of the connectors.
7 Insert the drive into the drive bay. Using all the screws included in the bag to secure the drive into the bay.
8 Replace the cover. Connect the mains plug of your configuration. When you have successfully installed the
drive and established all connections, it is now time to switch on the PC. You are ready to install the software.
Additional and updated
information can be found
directly on our fully
interactive website
www.memorex.com
6
ThirtyTwoMAXX
Installation
Next
Back
Other options
US
1
1
1
