Understanding printer messages
46
Understanding printer messages
Remove all color supplies The printer is set to Black Only mode in the CONFIG MENU in the Print
Mode menu item.
• Remove all color toner cartridges and color photoconductor units.
• Press until Continue appears, and then press to clear
the message and print in Black Only mode.
• Cancel the current job.
• See the User’s Guide for more information.
Remove paper from standard output
bin
Remove the media from the standard bin.
Resetting Fuser Count Wait for the message to clear.
Resetting the Printer Wait for the message to clear.
Restore Held Jobs? • Press until Continue appears, and then press to restore
all Print and Hold jobs on the hard disk.
• Press until Do not restore appears, and then press
to delete Print and Hold jobs.
Restoring Factory Defaults Wait for the message to clear.
Note: When factory default settings are restored:
• All downloaded resources (fonts, macros, symbol sets) in the printer
memory are deleted.
• All menu settings return to the factory default setting except:
– The Display Language setting in the “Setup” Menu.
– All settings in the “Parallel” Menu, “Serial” Menu, “Network” Menu,
“Infrared” Menu, “LocalTalk” Menu, “USB” Menu, and “Fax” Menu.
Restoring Held Job(s) x/y • Wait for the message to clear.
• Press until Quit restoring appears, and then press to
delete unrestored Print and Hold jobs.
Note: x represents the number of the job being restored, and y
represents the total number of jobs to be restored.
Serial <x> A serial interface is the active communication link.
Setup Required Remove the packing material from the printer. Make sure all supplies,
the fuser, the transfer belt, and the trays are installed correctly.
Some held jobs were lost • Press until Continue appears, and then press to clear
the message and continue printing.
The printer frees memory by deleting the oldest held job and
continues deleting held jobs until there is enough printer memory to
process the job.
• Cancel the current job.
Standard Bin Full Remove the stack of media from the bin to clear the message.
Submitting selection Wait for the message to clear.
Tray <x> Empty Load media in the tray to clear the message.
Tray <x> Low Add media to the tray to clear the message.
Tray <x> Missing Insert the tray.
USB The printer is processing data through the specified USB port.
USB <x>
View supplies Displays the current level of all printer supplies.
Message Action
