Using the detergent
20
30
BA D
C
1. Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent in the compartment (D).
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
Using the combi detergent tablets
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and
the rinse aid dispenser. The rinse aid indica-
tor always comes on if the rinse aid dis-
penser is empty.
1. Adjust the water softener to the lowest
level.
2. Set the rinse aid dispenser to the lowest
position.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Press the on/off button to activate the
appliance.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse aid.
Setting and starting a programme
Reset function
For some settings it is necessary that the
appliance is in user mode.
The appliance is in user mode when all the
programme indicators are on.
To set the appliance in user mode, do the
Reset function
1. Press and hold the programme button
until all the programme indicators come
on.
Starting a programme
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Press the programme button again and
again until only the indicator of the pro-
gramme you want to set is on.
4. Close the appliance door. The pro-
gramme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the programme
Do the Reset function.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
The end indicator comes on.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
If you do not press the on/off button,
after few minutes from the end of the
programme all the indicators go off.
This helps to decrease the energy con-
sumption,
30 leonard
