PROGRAMMES
Programme
1)
Degree of soil
Type of load
Programme
phases
Duration
(min)
Energy
(kWh)
Water
(l)
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
130 - 150 1.3 - 1.4 13 - 15
Normal soil
Crockery and
cutlery
Prewash
Wash 65 °C
Rinses
Dry
100 - 110 1.2 - 1.6 15 - 16
2)
Fresh soil
Crockery and
cutlery
Wash 65 °C
Rinse
30 0.8 9
3)
Normal soil
Crockery and
cutlery
Prewash
Wash 50 °C
Rinses
Dry
195 1.02 11
4)
All Prewash 14 0.1 4
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad
odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
OPTIONS
Acoustic signals
The acoustic signals operate when the ap-
pliance has a malfunction and it is not pos-
sible to deactivate them.
There is also an acoustic signal that oper-
ates when the programme is completed. By
default, this acoustic signal is off, but it is
possible to activate it.
How to activate the acoustic signal for
the end of programme
1. Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button
until the programme indicator
starts
to flash and the programme indicator
comes on with fixed light.
4. Press immediately the programme but-
ton.
•
The programme indicator
comes
on with fixed light.
•
The programme indicator
starts to flash.
5.
Wait until the programme indicator
goes off. The programme indicator
continues to flash.
6. Press the programme button. The end
indicator comes on. The acoustic signal
for the end of programme is activated.
leonard 27
