Prestige 643 ADSL Router
System Maintenance 10-21
Figure 10-24 System Maintenance - Time and Date Setting
Table 10-7 Time and Date Setting Fields
FIELD DESCRIPTION
Use Time Server when
Bootup=
Enter the time service protocol that your timeserver will send when the
Prestige powers up. Choices are Daytime (RFC-867), Time (RFC-868),
NTP (RFC-1305) and None. The main differences between them are the
format, e.g., the Daytime (RFC 867) format is day/month/date/year/time
zone of the server while the Time (RFC-868) format gives a 4-byte
integer giving the total number of seconds since 1970/1/1 at 0:0:0. The
NTP (RFC-1305) format is similar. Not all timeservers support all
protocols, so you may have to check with your ISP/network administrator
or use trial and error to find a protocol that works. If you select None
(this is the default value), you can enter the time manually but each time
the system is booted, the time & date will be reset to 2000/1/1 0:0:0.
Time Server IP
Address=
Enter the IP address of the your timeserver. Check with your
ISP/network administrator if you are unsure of this information.
Current Time:
New Time Enter the new time in hour, minute and second format.
Current Date:
New Date Enter the new year, month, day and format.
Time Zone = GMT
Press the [SPACE BAR
] to set the time difference between your time
zone and Greenwich Mean Time (GMT). Be aware when your time is
altered by daylight savings.
Once you have filled in the new time and date, press [
ENTER
] to save the setting and press [
ESC
]
to return to Menu 24.
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time: 00 : 00 : 00
New Time (hh:mm:ss): 00 : 04 :42
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01
Time Zone= GMT
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
