Prestige 643 ADSL Router
System Maintenance 10-19
Figure 10-21 Boot Module Commands
10.9 Command Interpreter Mode
This option allows you to enter the command interpreter mode. A list of valid commands can be found by
typing [help] at the command prompt. For more detailed information, check the ZyXEL web site or send e-
mail to the ZyXEL Support Group.
Figure 10-22 Command Mode
10.10 Boot Module Commands
Prestige boot module commands with accompanying explanations are shown in the following table. For
ATBAx, x denotes the number preceding the colon to give the console port speed following the colon in the
list of numbers that follows; e.g. ATBA3 will give a console port speed of 9.6 Kbps. ATSE displays the
seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH command
shows product-related information such as boot module version, vendor name, product model, RAS code
revision, etc.
Enter Menu Selection Number: 8
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit ether wan
ip bridge ipx
ras>
======= Debug Command Listing =======
ATHE
ATGO
ATUR
ATLC
ATBAx
ATTD
ATSE
ATSH
print help
boot system
upload RAS code
upload RAS configuration file
change baud rate. 1:38.4, 2:19.2, 3:9.6,
4:57.6, 5:115.2
download configuration to PC
display seed for password generation
display Revision, etc.
