Chapter 8 The VPN Transport Screens
User’s Guide
85
8.1.3 Before You Begin
Before you start configuring your WiMAX Modem to use VPN transport, ensure that you have
the following from the service provider:
• The IP address or domain name of the service provider’s edge router.
• Virtual circuit (VC) labels for each Ethernet Pseudowire you want to create.
• Also make sure that you know the VLAN IDs (Virtual LAN IDentifiers) of the VLANs on
your LAN.
8.2 General
Click ADVANCED > VPN Transport to turn VPN transport on or off and to set the VPN
transport endpoint (your service provider’s router).
Figure 41 ADVANCED > VPN Transport > General
The following table describes the labels in this screen.
Table 25 ADVANCED > VPN Transport > General
LABEL DESCRIPTION
L2/L3 VPN Transport General Setup
Transport L2/L3
VPN...
Select this to turn the VPN transport feature on. Deselect it to turn the VPN
transport feature off.
Remote GRE
Tunnel End
Enter the domain name or IP address of your service provider’s router.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.
