Chapter 5 The Setup Screens
User’s Guide
55
5.3 Time Setting
Click SETUP > Time Setting to set the date, time, and time zone for the WiMAX Modem.
Figure 21 SETUP > Time Setting
The following table describes the labels in this screen.
Table 10 SETUP > DHCP Client
LABEL DESCRIPTION
Current Time and Date
Current Time Displays the current time according to the WiMAX Modem.
Current Date Displays the current time according to the WiMAX Modem.
Time and Date Setup
Manual
Select this if you want to specify the current date and time in the fields
below.
New Time
Enter the new time in this field, and click Apply.
New Date
Enter the new date in this field, and click Apply.
Get from Time Server
Select this if you want to use a time server to update the current date and
time in the WiMAX Modem.
Time Protocol Select the time service protocol that your time server uses.Check with
your ISP or network administrator, or use trial-and-error to find a protocol
that works.
Daytime (RFC 867) - This format is day/month/year/time zone.
Time (RFC 868) - This format displays a 4-byte integer giving the total
number of seconds since 1970/1/1 at 0:0:0.
NTP (RFC 1305) - This format is similar to Time (RFC 868).
Time Server Address Enter the IP address or URL of your time server. Check with your ISP or
network administrator if you are unsure of this information.
