Chapter 5 The Setup Screens
User’s Guide
54
Time
A network protocol for retrieving the current time from a server. The computer issuing the
command compares the time on its clock to the information returned by the server, adjusts
itself automatically for time zone differences, then calculates the difference and corrects itself
if there has been any temporal drift.
NTP
NTP stands for Network Time Protocol. It is employed by devices connected to the Internet in
order to obtain a precise time setting from an official time server. These time servers are
accurate to within 200 microseconds.
5.1.3 Before You Begin
• Make sure that you have made all the appropriate hardware connections to the WiMAX
Modem, as described in the Quick Start Guide.
• Make sure that you have logged in to the web configurator at least one time and changed
your password from the default, as described in the Quick Start Guide.
5.2 Set IP Address
Click the SETUP icon in the navigation bar to set up the WiMAX Modem’s IP address and
subnet mask. This screen displays this screen by default. If you are in any other sub-screen you
can simply choose Set IP Address from the navigation menu on the left to open it again.
Figure 20 SETUP > Set IP Address
The following table describes the labels in this screen.
Table 9 SETUP > Set IP Address
LABEL DESCRIPTION
IP Address
Enter the IP address of the WiMAX Modem on the LAN.
Note: This field is the IP address you use to access the
WiMAX Modem on the LAN. If the web configurator is
running on a computer on the LAN, you lose access
to it as soon as you change this field and click Apply.
You can access the web configurator again by typing
the new IP address in the browser.
IP Subnet Mask
Enter the subnet mask of the LAN.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
