One User’s Manual or CD (including quick guide)
Network Software Requirements
The Broadband Firewall Router requires one of the following types of software:
Windows 95/98/Me or Windows NT/2000/XP
Any TCP/IP-enabled systems like Mac OS and UNIX
Broadband Firewall Router Embedded 4-port 10/100Mbps Switch
The Broadband Firewall Router with embedded 4-port 10/100Mbps Switch features
auto-negotiation switch ports and provides the flexibility to fit into your operational space and
network environment.
This device is built with plug & play, auto-negotiation supports all ports, half & full-duplex
multi-selection, and a store and forward transmission scheme.
The Broadband Firewall Router requires the following network hardware:
UTP cable (Cat.5 Twisted-pair), 10Base-T or 100Base-TX Fast Ethernet.
Note: Prepare twisted-pair cables with RJ-45 plugs. Use Cat.5 cable for all connections.
Make sure the length of each cable does not exceed 328 feet (approximately 100
meters).
LED Indicators
LED State Indication
On (Green) The Broadband Firewall Router’s power is on.
Power
Off The Broadband Firewall Router’s power is off.
Status Blinking (Red)
When power is first switched on, the Status indicator will flash one
time.
On (Green) Port has a valid network connection at 100Mbps.
On (Orange) Port has a valid network connection at 10Mbps.
WAN
Blinking
(Orange)
Data is being transmitted and received via the WAN port.
On (Green) Port has a valid network connection at 100Mbps.
On (Orange) Port has a valid network connection at 10Mbps.
LAN
Off Port has not established a network connection.
Blinking (Green) Data is being transmitted and received at 100Mbps.
Activity
Blinking
(Orange)
Data is being transmitted and received at 10Mbps
Parallel Blinking (Green) Data is being transmitted via Parallel Port (PID1)
USB Blinking (Green) Data is being transmitted via USB Port (PID2)
DSL/Cable Modem Requirement
The Broadband Firewall Router requires one of the following external modem(s) or device(s):
2
