80 g/m
2
Line Art Paper 1
Description
An economical, basic 80 g/m
2
medium grade, bright white paper with a smooth matt surface, for
use in 360 dpi print mode, but specifically intended for line drawing applications, it meets the line
width specifications for GIS/CAD Engineering applications. Not recommended for printing full
graphic images.
Line Art Paper can be over-laminated with most commonly available thermal and pressure laminates
for added durability.
Applications
Line art, CAD / GIS and engineering drawings, checkplots, charts, graphs, diagrams and similar
images with low levels of ink and area coverage.
Physical Characteristics
Base Weight
80
m
2
Calliper
113 microns
Opacity
95%
Brightness
115
Dimensions
Code Length
023R01365 54” 1372mm 91m
023R01366 36” 914mm 122m
023R01394 A0 841mm 122m
023R01396 A1 594mm 122m
Width
Compatibility
Xerox X2
Xerox Xpress
Seiko IP4XXX
Operating Instructions
• Recommended for indoor use only.
• Use for line drawing and small areas of low saturation covering.
• Laminate with either pressure or thermal laminates if prints are to be exposed to severe
conditions, or if longer durability is required.
• For best results store and use within temperatures of 10-30
o
C and relative humidity of 40-65%.
Store the product in its original carton and bag / wrapper.
• Keep the image surface dry and free of grease, oil, silicones and dirt.
• Ensure that roll ends are protected and that the edge of these media are not damaged. If the
media edges are not flat this can result in damage to the printer.
www.xerox.com/iccprofiles.com
12
