Dil ID: 8
Dil Adı: italy
Dil Kodu: it1tayfun Prodotti del Marchio Whirlpool
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



EN
24
* Only available in selected models.
Half load
If there are not many dishes to be washed, a half
load cycle may be used in order to save water, electricity
and detergent. Select the wash cycle and press the HALF
LOAD button: the indicator light will illuminate.
Remember to halve the amount of detergent.
It is better to use powder detergent in this case.
Delayed start
It is possible to delay the start time of the wash
cycle by 3, 6 or 9 hours.
1: After selecting the desired wash cycleand any other
options,press the DELAYEDSTART button. theindicator
light will illuminate.
2:SelectthedesireddelaytimebypressingtheDelayed
Start button repeatedly; the wash phase (3 hours), the dry-
ingphase(6hours)andend(9hours)indicatorlightswill
illuminate in succession.
If the Delayed Start button is pressed again, the option is
deselected and the indicator light switches off.
3. Thecountdown will beginonce the Start/Pause button
has been pressed. The selected delay period indicator light
flashesandtheStart/Pausebuttonstopsflashing(thelight
becomes fixed instead).
3.Oncethistimehaselapsed,theDELAYEDSTARTindicator
light switches off and the wash cycle begins.
The Delayed Start function cannot be set once a wash
cycle has been started.
Wash options
The OPTIONS may only be set, modified or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected was cycle
(see Table of wash cycles)
, the
corresponding LED flashes rapidly 3 times.
If an option is selected which is incompatible with another
option or wash cycle selected previously, the incompatible
option light will flash 3 times and switches off, while the most
recently selected setting remains lit.
To deselect an option which has been set by mistake, press
the corresponding button again.
Wash options