If your vehicle is equipped with these type of steering wheel controls,
they may be used to answer and end your phone calls as well.
BLUETOOTH INTERFACE FOR SELECT 1998-2011 TOYOTA & SCION VEHICLES
TOYOTA
2003 - 2011 4 Runner
2000 - 2009 Avalon
2002 - 2011 Camry
1998 - 2011 Corolla
2000 - 2005 Celica
2000 - 2005 Echo
2001 - 2011 Highlander
1998 - 2011 Land Cruiser
2007 - 2011 FJ Cruiser
2002 - 2010 Matrix
2001 - 2005 MR2
2004 - 2011 Prius
2001 - 2005 RAV4
2001 - 2011 Sequia
1998 - 2011 Sienna
1998 - 2011 Solara
2000 - 2011 Tacoma
2000 - 2011 Tundra
2009 - 2011 Venza
2007 - 2011 Yaris
SCION
2004 - 2011 xA
2004 - 2011 xB
2004 - 2011 tC
2004 - 2010 xD
IMPORTANT NOTE
FOR CARS 1998-2003, WITH BASE
RADIO. VEHICLE MUST HAVE ONE OF
THE FOLLOWING FOR KIT TO
FUNCTION:
1. STEERING WHEEL CONTROLS
2. AVC CONNECTOR (XM PORT)
3. CD CHANGER PORT
USING THE MENU STRUCTURE:
MISSED CALLS:
1. Press the “PWR” button twice.
2. Press the “PWR” button once to enter the menu options.
Continue to press the “PWR” button twice till you hear the
interface announce “MISSED CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
INCOMING CALLS:
1. Press the “PWR” button twice.
2. Press the “PWR” button once to enter the menu options.
Continue to press the “PWR” button twice till you hear the
interface announce “INCOMING CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
OUTGOING CALLS:
1. Press the “PWR” button twice.
2. Press the “PWR” button once to enter the menu options.
Continue to press the “PWR” button twice till you hear the
interface announce “OUTGOING CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
SETTING TTS VOLUME:
1. Press the “PWR” button twice.
2. Press the “PWR” button once to enter the menu options.
Continue to press the “PWR” button twice till you hear the
interface announce “SETTING VOLUME”, and wait for her
announcement.
3. Set the TTS volume by turning the volume knob and waiting for
the announcement. Each announcement will indicate the volume
level of the TTS.
4. When the desired volume level is reached, press the “PWR” button
once to select.
DELETE ALL PAIRED DEVICES:
This feature allows you to delete all paired devices on the interface.
The module does NOT allow the user to only clear one device. The
module will delete all previously paired devices only
1. Press the “PWR” button twice.
2. Press the “PWR” button once, to enter the menu options.
Continue pressing the “PWR” button twice till you hear the
interface announce “DO YOU WANT TO DELETE PAIRED
PHONE LIST”.
3. Press the “PWR” button once within 3 seconds to conrm.
4. The interface will ask “ARE YOU SURE”, press the “PWR”
button once to re-conrm..
Note: The menu structures only remember the last 24
numbers in the call log from dialed from the mobile
phone.
Note: All menu structures work in 3 second increments.
If after 3 seconds the interface will time-out.
BEEBT-22
VOICE DIAL HOLD SEEK DOWN FOR 2 SECONDS
ANSWER PRESS SEEK UP ONCE
END PRESS SEEK DOWN ONCE
REJECT PRESS SEEK DOWN ONCE
ANSWER SECOND CALL PRESS SEEK UP ONCE
SWITCH BETWEEN CALLS PRESS SEEK UP ONCE
ENTER PRIVACY MODE PRESS SEEK UP ONCE
INCREASE VOLUME PRESS VOLUME UP
DECREASE VOLUME PRESS VOLUME DN
USING THE STEERING WHEEL CONTROLS
ANSWER
END
ANSWER
END
Have a bad connection when
using the A2DP or Handsfree
proles?
Are you experiencing random
static interuptions durring your
phone calls?
Have you lost functionality on
your Navigation radio and/or
steering wheel controls?
Have you paired your mobile
device, and get no sound from
the radio? Try reseting the TTS
volume setting.
Is there a pop sound being heard
when swtching sources on your
premium JBL radio system?
Does the audio on your radio
mute while using the mobile
applications on your mobile
phone?
Delete all paired devices on your
mobile device and on the UBT.
(See Using The Menu Structure)
Remove the battery on the
mobile device for a minimum of
15 seconds.
Reset the radio using the
DVD-ROM originally included
with the vehicle.
With the phone paired to the
UBT, enter the “SETTING TTS
VOLUME” under
menu structure.
The default level is
at volume 4.
Use a T-Tap terminal to connect
the mute wire on the harness.
(See Fig.1) on page 2.
Try placing your mobile phone
on vibrate, this will avoid the
radio mute interuption.
PWR VOL
TUNE
AM FM TAPE DISC
SEEK TRACK CH PROG DSIC
LEX
24-PIN
(male plug)
12-PIN
(male plug)
3-PIN
(male plug)
TO FACTORY
RADIO
20-PIN
(male plug)
6-PIN
(male plug)
10-PIN
(male plug)
6-PIN
(male plug)
TO FACTORY
HARNESS
Rev. 082614
