SCION tC 2007 SUPERCHARGER
Preparation
Page 1 of 36
Issue A: 04/10/07
Part Number: PTR41-21070
NOTE: Part number of this accessory may not be
the same as the part number shown
Kit Contents
Item Qty Description
1 1 Supercharger Main Assembly
2 1 Heat Shield, TRD modified
3 1 TRD Upper Air Box Assembly
4 1 Airbox, Lower TRD
5 1 Hose, Upper Engine Radiator
6 1 Intake Boot, Fender to Airbox
7 1 Air Filter 17801-03010
8 1 Hose Assy., Oil Return Hard Line
9 1 Oil Pan w/ return tube braze-in
10 1 Hose, Airbox to SC intake “Tuba”
11 1 Hose, SC to Throttle Body
12 1 Intake Manifold, Cast Aluminum TRD
13 1 Bypass Valve, Bosch
14 3 Bolts, SHCS 6 x 1.0 x 16 x 5 mm Allen WF
14 1 Wire Loom ½ “ 8 inch length
15 3 Flat Washers, 6mm
16 1 O-Ring for SC Inlet Manifold 3.237 “ ID
17 3 Bolts, 3/8-16 UNC x 1”x 5/16 Allen WF
18 1 Bracket, Cast Aluminum Transmission Mount
19 2 Bolts, SHCS 10 x 1.50 x 70 x 8mm Allen WF
19 1 Hose, Bypass to SC Intake
20 2 Nuts, 10 x 1.5, 6Pt, Self Locking 17mm WF
20 1 CPS Extension Wire
21 1 Hose Assy., Blue Parker Push Loc Oil Feed
22 1 Bracket, AC Line Rear
23 1 Bracket, Lower Airbox
24 1 Bracket, AC Line Front
25 3 Rubber Grommets, Airbox Lower
25 2 Bolts, Flange Head 6 x 1.0 x 12 for AC line
brackets
26 3 Metal Spacers, Airbox Lower (Not Shown)
26 1 T fitting, 1/4 x 1/4 x 3/16 vacuum line
27 1 Fitting, Hexagonal “T” Oil Feed
28 1 Plastic Clamp, Fuel Supply Line 23842-28010
29 1 Bolt, Flange Head 10x1.25x25 x 14WF
(captured)
30 2 Bolts, SHCS 12 x 1.25 x 80 x 10mm AllenWF
31 1
71°C (160°F) Thermostat
32 4 Fuel Injectors, TRD
33 4 Spark Plugs, TRD Denso K22PR-U
34 1 Adell Clamp, dash 12, Galv. Steel w/ rubber
35 1 Bolt, 8 x 1.25 x 16 x 13WF, Oil Return Line
36 1 Crimp Nut, 8 x 1.25 x 13 mm WF, Oil Return
37 1 Washer, 8 mm Flat, Oil Return Line
38 5 Hose Clamps 25-40 mm
39 2 Zip Ty-Wrap, Small
40 1 Fuel Supply Line, TRD
41 1 Belt, Serpentine Drive 7PK2325 (Dayco)
42 2 Hose Clamps, Oil Return Line, Spring Preload
43 1 Wire Loom ¾” 7 inch length
45 1 Hose, 3/16” vacuum, Bypass to Throttle Body
16” long
46 1 Hose Clamp 70-90 mm
47 2 Zip Ty-Wrap, 7 inch/Medium TY525MX
48 1 Bolt, Hi-Strength 12-Pt Crank Bolt
w/captured washer 14 x 1.5 x 45 x 19WF
49 3 Hose Clamps 60-80 mm
50 3 Zip Ty-Wrap, OE anchor style, 82711-16830
51 3 Badge, TRD, PTR01-3500E-EM
52 3 Badge, Supercharged, PTR01-3500T-RD
53 1 Belt Routing Label
54 1
Fitting, Oil Feed 1/8”MNPT x dash 4 37°M
AN (Not Shown)
54 1 Tune-Up Label
55 2 EO Label
56 1 Premium Fuel Only Decals
57
58 1 Warranty Card, TRD Supercharger
58 1 Mirror Hanger
58 1 Registration Card
58 1 Installation Instructions
59 1 VSV Rubber mounting bracket
59 1 Bypass Valve Tube
60 1 Bypass Hose, Tube to Bypass Valve
