9
Construction
● Freestanding front loading machine
with drop down door
● Suitable for use freestanding or can
be slotted under a countertop in an
existing laboratory.
● External casing:
G 7883 – White (not for G.B.)
G 7883 and G 7883 CD – Stainless
steel
● Space frame construction with side
wall insulation
➔ low heat- and noise-emissions
➔ easy to recycle
● Wash cabinet and spray arms in high
grade stainless steel
Programme controls
● Multitronic Novo plus with 8 standard-
wash programmes
(See page 12 for a description of the
controls, and page 35 for a descrip-
tion of the programmes)
Features
● Wash cabinet with 2 levels
➔ high capacity
● 2 spray arms (3rd spray arm is in the
upper basket)
➔ thorough cleaning results
● Direct coupling of upper basket and
injector mobile units to water feed
➔ maximum use made of suds solu-
tion
● Profi Monobloc Water softener
➔ continual reactivation during the
cleaning programme
● Water intake controlled by fly wheel
counter
➔ precise amount of water taken in
ensures the correct ratio of water to
cleaning and disinfecting agents
● 4-fold suds filtration system with
wide area filter, coarse filter, glass
splinter filter and micro-fine filter.
● Drying unit/radial fan for hot air dry-
ing (G 7883 CD)
➔ thorough internal and external
drying of laboratory glassware
● Electrical door lock
➔ safety for personnel
➔ high process safety
● Access to check and control temper-
atures and temperature holding
times
Dispenser system
● One dispenser each in the door for
powder cleaning agent and liquid
agents (rinsing agent) (G 7883/
G 7883 CD)
● 1 DOS 10/30 dispenser pump for
liquid, acid agents (G 7883/G 7883
CD)
● Connection for DOS G 60 dispenser
for liquid cleaning agents (G 7883)
● 1 DOS 60/30 dispenser pump for
liquid cleaning agents (G 7883 CD)
● Drawer with 2 x 5 litre containers
(G 7883 CD)
Test certificates
● Protection classification IP x 1 (drip
water protected)
Certification applied for
● VDE
● EMV/radio and television suppressed
● DVGW
● MPG CE 0366
Optional extras
G 7883
● Serial interface RS 232 for PC or
printer for process documentation *
● AD pump for non-pressurised
demineralised water feed *
● Steam condenser/heat exchanger *
● 1 dispenser (DOS module G 60) for
liquid cleaning and disinfecting
agents
● Plinth, H 300 mm
G 7883 CD
● AD pump for non-pressurised
demineralised water feed *
● Steam condenser *
● Plinth, H 300 mm
● Machine lid
* N.B. These features are available as
standard on G.B. machines
See page 34 for technical data
