Setting the standard
14
Setting the standard
Thorough cleaning is an essential pre-
requisite for preparing analytically clean
laboratory glassware for reproducable
results. The cleaning and disinfecting
processes must also be validated in
accordance with Health and Safety
regulations. Programme data and
sequences must be documented.
Miele’s latest generation of washer
disinfectors comply with the require-
ments of EN ISO 15883.
The new generation
Miele, as a leading and innovative
manufacturer, has set new standards
for washer disinfectors with the latest
G 78 generation of machines. And in
doing so have also been thinking about
your pocket: All new machines can be
equipped with your existing series
G 77 machine baskets and inserts – so
you won’t need to replace everything –
typically Miele.
The new G 7883, G 7883 CD and
G 7835 CD washer disinfectors are a
significant development in the history
of cleaning and disinfecting by machi-
ne. They offer the very best in perfor-
mance and reliability – both for the
small laboratory as well as for labora-
tory glassware processing in industrial
and research laboratories. The single
compartment system offered by Miele
washer disinfectors, in which each
machine cleans, disinfects and dries,
has proved itself as particularly flexible
and economical. The automatic mobile
unit recognition on the G 7835 CD,
further ensures that instruments are
cleaned in the correct programme.
Miele’s new washer disinfectors
have an excellent safety record just
as you would expect from Miele.
Serial interface for PC or printer
connection for documenting process
parameters.
Separate sensors control and monitor
the process to ensure that the machine
is able to maintain cleaning, disinfec-
ting and final rinse temperature para-
meters with even greater precision.
Validation and revalidation is possible
thanks to the controllability of the tem-
perature in the wash cabinet and on
the items being processed via the
many temperature sensors.
The door is securely locked for the
whole programme duration.
It can only be opened at the end of the
programme if all programme parame-
ters have been successfully achieved.
