Switching on
^
Close the door.
^
Open the stopcocks (if turned off) .
^ Press the I-0 button.
When the program selector is at the f
“STOP” position a point lights up in the
display.
Starting the program
^ Turn the program selector clockwise
or anti-clockwise to the required
program.
The wash temperature of the
selected program is shown in the
display, except with D (PRE-RINSE)
and 6 (DRAIN).
^
Select additional function 3
(DRYING) if required, (see “Selecting
an additional function”).
^
Press the 6 “Start” button. The
display will now show the actual
temperature.
The indicator light next to the “Start”
button comes on.
Once the program has started, all other
programs are blocked. If the program
selector is then turned to another
program, the values shown in the
display go out. The values can be seen
again only if the program selector is
turned back to the position of the
program currently in operation.
^ Press the 4 button to alternate the
display between elapsed time and
actual temperature.
Note that during the heat-up stage in
“Main wash” and “Final rinse” the
desired temperature is shown in the
elapsed time display.
Switching the machine on and off
28
