Web Smart Switch
Error - to record system failures, such as events which will cause the
switch to malfunction and events such as invalid user input in the
web configurator.
Warning - to record non critical errors on the Switch. The Switch will
continue to function when warnings are recorded.
Info - to record regular system events, such as configuration changes or
logins.
Debug - to record events which can be helpful for engineering
debugging of the switch’s function. This field is not recommended
to track as it creates many messages not helpful to typical users.
Notice- to record the error which need to be noticed.
Click Apply to save your changes to the switch.
It displays the status of local log settings.
It displays the server information.
It displays the severity status.
It displays the action status.
3.8.4 Factory Default
Follow the steps below to restore the switch back to the factory defaults.
1. Click Diagnostics->Factory Default to view the screen as shown next.
2. Click the Restore button, then the confirm interface pops up.
3. Click OK to restore all switch configurations to the factory defaults and the switch will reboot.
3.8.5 Reboot Switch
