43
The following table describes the parameters in this page:
Select the country you are in.
Select your Internet Service Provider (ISP).
Virtual path identifier (VPI) is the virtual path between two
points in an ATM network. Its valid value is between 0 and
255. Enter the correct VPI provided by your ISP.
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 1
and 65535. Enter the correct VCI provided by your ISP.
Select a connection type from the dropdown list. You may
select PPPoE/ PPPoA/ Dynamic IP/ Static IP/ Routered IP/
Bridge.
5.3.2. Bridge Mode
Select Bridge Mode, click NEXT, and the page shown in the following figure
will appear.
