Vigor2700 Series User’s Guide
32
Enable Check this box to enable that channel. Only channel 3 to 8 can be set
in this page, for channel 1 to 4 are reserved for NAT using.
P1 to P4 It means the LAN port 1 to 4. Check the box to designate the LAN
port for channel 3 to 8.
Service Type Normally, service type is used for the service of video stream (e.g.,
IPTV). It can divide the packets from remote control and from video
stream into different PVC. In general, the protocol used by remote
control is IGMP.
Normal – It means that the PVC can accept all packets except IGMP.
IGMP – It means that the PVC can accept packets of IGMP only.
Add Tag To identify the usage of PVC, check this box to invoke this setting.
And type the number for VLAN ID (number).
Click Clear to remove all the configurations in this page if you do not satisfy it. When you
finish the configuration, please click OK to save and exit this page. Or click Cancel to abort
the configuration and exit this page.
