Vigor2700 Series User’s Guide
128
WEP For key length 64 bits - For 64 bits WEP key, either 5 ASCII
characters, such as 12345 (or 10 hexadecimal digitals leading by 0x,
such as 0x4142434445.)
For key length 128 bits - For 128 bits WEP key, either 13 ASCII
characters, such as ABCDEFGHIJKLM. (or 26 hexadecimal digits
leading by 0x, such as 0x4142434445464748494A4B4C4D)
All wireless devices must support the same WEP encryption bit size
and have the same key. Four keys can be entered here, but only one
key can be selected at a time. The keys can be entered in ASCII or
Hexadecimal. Check the key you wish to use.
3
3
.
.
1
1
1
1
.
.
4
4
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights.
Enable Mac Access Filter Select to enable the MAC Address filter for wireless LAN
identified with SSID 1 to 4 respectively. All the clients
(expressed by MAC addresses) listed in the box can be grouped
under different wireless LAN. For example, they can be
grouped under SSID 1 and SSID 2 at the same time if you
check SSID 1 and SSID 2.
Client’s MAC Address Manually enter the MAC address of wireless client.
s Check this box to isolate the stations from LAN.
Add Add a new MAC address into the list.
Remove Delete the selected MAC address in the list.
Edit Edit the selected MAC address in the list.
Cancel Give up the access control set up.
OK Click it to save the access control list.
Clear All Clean all entries in the MAC address list.
