Vigor2700 Series User’s Guide
126
Hide SSID Check it to prevent from wireless sniffing and make it harder for
unauthorized clients or STAs to join your wireless LAN. Depending
on the wireless utility, the user may only see the information except
SSID or just cannot see any thing about Vigor wireless router while
doing site survey.
SSID Means the identification of the wireless LAN. SSID can be any text
numbers or various special characters. The default SSID is "default".
We suggest you to change it.
Isolate
LAN – Check this box to make the wireless clients (stations)
with the same SSID cannot access wired PCs on LAN.
Member –Check this box to make the wireless clients (stations)
with the same SSID not accessing for each other.
Channel Means the channel of frequency of the wireless LAN. The default
channel is 6. You may switch channel if the selected channel is
under serious interference.
Long Preamble This option is to define the length of the sync field in an 802.11
packet. Most modern wireless network uses short preamble with 56
bit sync filed instead of long preamble with 128 bit sync field.
However, some original 11b wireless network device only support
long preamble. Check it to use Long Preamble if needed to
communicate with this kind of devices.
Packet-
OVERDRIVE
TM
This feature can enhance the performance in data transmission
about 40%* more (by checking Tx Burst). It is active only when
both sides of Access Point and Station (in wireless client) invoke
this function at the same time. That is, the wireless client must
support this feature and invoke the function, too.
Note: Vigor610 wireless adapter supports this function. Therefore,
you can use and install it into your PC for matching with
Packet-OVERDRIVE (refer to the following picture of Vigor610
wireless utility window, check TxBURST on the tab of Advanced).
Note: * means the real transmission rate depends on the
environment of the network.
Rate Control It controls the data transmission rate through wireless connection.
Upload – Check Enable and type the transmitting rate for data
