1Set the Valve selector to the “WASH · RINSE” position.
2Turn the water tap on.
3When the rinsing water becomes clear, turn off the water tap.
4Set the Valve selector to the “DRAIN” position to discharge the water.
1Set the Valve selector to the “WASH • RINSE”.
2Turn the water tap on and supply correct amount of water to the wash tub.
3Adjust the wash timer in accordance with the clothes to be rinsed.
4Set the Valve selector to the “DRAIN” position to discharge the water.
Before final rinsing you can select this course for more effective rinse.
1Load the laundry evenly into the spindryer drum.
2Cover the laundry with safety cover and close the inner lid.
3Close the spindryer lid.
4Set the water guide knob to “SPIN” and Valve selector to “DRAIN”.
5Supply water for about 1minute.
6After water supply, set the spin timer 1~2minutes.
7Repeat 5~6, if you want.
HOW TO RINSE
Overflow Rinse
Water Saving Rinse
Spin Rinse
Note: Before rinsing, the wash load may be transferred to the spindryer drum for spinning for 2~3
minutes (approx.) to remove suds(See HOW TO SPIN DRY.)
On completion, transfer the wash load to the wash tub for rinsing.
Note: When spin rinsing,
1. Do not supply water to spindryer drum while rotating with high speed, water may splash and rinsing
efficiency will be decreased.
2. For best efficiency load the laundry from 60% to 80% of the full capacity.
3. Do not drain the washing side simultaneously, the spindryer drum may be disturbed by remaining
water in the spinning side.
4. If supplied water is too much, water will be wasted. Adjust water tap properly to prevent over flow to
the washing side.
