• Connection of Hoses
• Attach the water intake hose to the water inlet located in
the control panel. Fit the other end of the hose to
either a hot or cold water tap as required.
• Attach the drain hose to the drain outlet at the rear of the base.
• Hang the drain hose on the edge of a sink.
Caution:This unit is made of poly propylene, use water
below 60 °C
Caution:The opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Drain Outlet
Drain hose
A
HOW TO WASH
Preparation
How to Wash
(PUMP)
• Sort the clothes into groups-whites, colourfast, non-colourfast, delicates, lint free, lint producer, etc., and
wash according to the
LAUNDRY GUIDE.
• Clothes with worn patches or tears should first be mended. Empty out all pockets and close all side
fasteners. Treat bad stains prior to washing.
• Ensure the drain hose is in its correct position. (See INSTALLATION)
• Insert power cord plug into the power point and switch on.
1
2
3
4
5
Open the water faucet and feed water to the water level indicated inside the wash tub.
When washing is finished, set the drain selector to the “DRAIN” position and drain the wash tub.