DVI Matrix Switcher
10. Specification
Video Input
Video Output
Input DVI Output DVI
Input Connector Female DB24+5 Output Connector Female DB24+5
Input Level T.M.D.S. 2.9V/3.3V Output Level T.M.D.S. 2.9V/3.3V
Input Impedance 75Ω Output Impedance 75Ω
Video General
Gain 0 dB Bandwidth 340 MHz (10.2 Gbit/s)
Video Signal
DVI 1.0 standard DVI-D full
digital
T.M.D.S signal
Max Time-delay 5nS (±1nS)
Crosstalk <-50dB@5MHz Switching Speed 200ns (Max.)
EDID and DDC
Management
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data
using DVI and HDMI standards, EDID and DDC signals are actively buffered. The built-in
EDID/DDC database can analyze these two signals, mix them, and realize the handshake of
them internally.
HDCP Management
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3
standards. The built-in HDCP management technology can analyze HDCP key, and realize
the handshake internally.
Audio General
Frequency Response 20Hz ~ 20KHz CMRR >90dB@20Hz~20KHz
Stereo Channel
Separation
>80dB@1KHz THD + Noise
nominal level
Control Parts
Serial Control Port
RS-232, 9-pin female D
connector
Pin Configurations 2 = TX, 3 = RX, 5 = GND
IR Remote Default IR remote Front Panel Control Buttons
Options TCP/IP control by PTNET(PTN's programmable interface)
General
Power Supply 100VAC ~ 240VAC, 50/60Hz Power Consumption 25W
Temperature
-20 ~ +70℃
Humidity 10% ~ 90%
Case Dimension
W483 x H44 x D235mm
(1U high, full rack wide)
Product Weight 1.5Kg
