7
.-
To start the programme, once options have been chosen, press the key H. The washing machine will begin to operate. If
you wish to cancel the option you have selected, press the key again. (The pilot light will go off.)
B2 delay start button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour delay (h01 appears
on the display); the pre-set delay increases by 1 hour each time the button is pressed, until h24 appears on the display, at
which point pressing the button again will reset the delay start to zero.
Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The countdown will begin and
when it has finished the programme will start automatically.
It is possible to cancel the delay start by taking the following action:
Press and hold the button for 5 seconds until the display will show the settings for the programme selected.
At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE” button or to cancel
the process by setting the selector to the (OFF) position and then selecting another programme.
Calculation of programme time – duration of the cycle (V)
When selecting a programme, the duration of the cycle will be automatically displayed, this can vary according to the options
selected.
In the first 4 minutes of the washing cycle, with the cottons and mixed synthetics programmes, the washing machine
calculates the programme times taking in account the amount of clothing placed in the drum (pilot lamp I "kg.detector" lit)
During this period the display pilot lamps will spin, displaying every 5 seconds the max. time of the programme times. After
the first 4 minutes the duration of the cycle will be displayed, and which will be constantly updated until the end of the
programme.
Door Lock Lamp - the light indicating the start of the programme (G)
It lights up after pressing the START key.
Af
ter having pressed the START/PAUSE key, the lamp will initially flash, then, remaining fixed until the end of the washing.
Two (2) minutes having lapsed after the end of the wash, the light will go out to indicate that it is now possible to open the
door.
Cancel-change programs
Once you have started a program, and wish to change or cancel it, you should proceed in the following manner,
- Put the program selector in the (OFF) position. At that instant, you have cancelled the program and can if you wish to
do so, select a new one.
- Select the new program.
- Click the key (H) again.
The washing machine will perform the new selected program.
Programme pause
It is possible to momentarily stop the wash programme so that more washing can be added, and to do so, proceed as
follows:
- Hold down the (H) key until the option key pilot lamps begin to flash and the time remaining indicator display V lights up.
- When the Door Lock lamp goes out (after approx. 2 minutes), open the door and add the desired washing.
- Correctly close the doors of the drum and the outer cover.
- Press the key H, and the washing machine will continue with the programme.
When the programme has been completed, the message "END" will appear in the indicator display,
Wait until the Door Lock lamp (G) goes out (after approx. 2 minutes)
“To remove the washing, set the programme selector to the (OFF) position”, before opening the washing-
machine lid and the drum doors.
28.01.10 / H- 46005730 EN
