Programme table mod CTD 1208
washing powder
load option keys C
programme programme for
aprox.
time
min.
max.
temp.
setting
ºC
max.
spin
speed
rpm/
min
max.
load
Kg
.
I
II
Cotton+ Pre
White+prewash
display 90º 1200
8
COTTONS
*
Fast coloureds display 60º 1200
8
SYNTHETICS
Fast coloureds display 60º 800
4
Delicates display 40º 600 2,5
Hand wash
display 30º 800 1,5
DELICATES
Woollens Gentle
display 40º 800
2
Gentle rinse
display 800
Gentle spin display 1200
Empty
display 0
Mix&Wash display 40º 1000
8
14’ 30º 800
1,5
30’ 40º 800
2,5
SPECIAL
Fast
44’ 40º 800
3,5
* Programme also recommended for low-temperature washes (lower than the max. shown).
Programme tested in accordance with CENELEC EN 60456 with the maximum Degree of Soiling selected.
Technical data mod. CTD 1208
Mains
voltage
Wash
power
rating
Spin
power
rating
Pump
motor
power
rating
Heating
element
power
rating
Max.
Power
input
Mains fuse
Amp.
rating
Water
pressure
Water
consumption
*prog.
EN60456
Energy
consumption
*prog.
EN60456
220-230V.
50Hz.
175 W. 400 W. 30 W. 1950 W. 2150 W. 10 A. 0,05-0,8 Mpa 56 L. 1,36 Kw.
IMPORTANT:
- Do not use liquid detergent for programs with a prewash cycle and/or timed start.
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.
- detergent for pre-wash I
- detergent for wash programme II
- fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme.
4.- Alternatively, if you wish, you can use the key
B3
to choose washing temperature.
B3 wash temperature
When selecting a programme, the recommended wash temperature is automatically indicated, and the corresponding
indicator lamp lights up.
It is possible to lower or raise this temperature, by pressing the (B3) button
.
Note: The temperature must be adjusted before selecting DEGREE OF SOILING.
