8 TLS2200
TM
Thermal Transfer Printer User’s Guide
Step 6. Remove a Marker Roll
1. Cut off printed labels with the cutter
lever.
2. Open the roll door.
3. Slide the locking lever to the unlock
position.
4. Back the markers out of the material
guide slots.
5. Pull the marker roll out of its cradle.
Step 7. Install a Marker Roll
1. Slide the locking lever to the lock position.
2. Turn the power switch on.
3. Open the roll door.
4. Pressing the guide plate lever down, slide and snap it into a notch that matches your
marker roll width.
5. Making sure labels unwind from the top, snap the marker roll firmly into cradle.
6. Press <Enter> to clear the “ERROR No Label Present” message.
7. Feed leading edge of marker roll through the guide slots.
8. Press <Feed>. (Continue to manually push marker roll edge until it catches.)
9. Close the roll door.
Step 8. Type Text
Use the following guidelines when typing text:
Text Type Guidelines
Alphabetic
letters
Type lower-case letters (a-z) by pressing the appropriate keys.
Press the <Space> key to add a space between words. Type
an upper-case letter by holding down the <Shift> key while
typing the letter. To type many upper-case letters in a row,
turn the caps lock feature on by pressing the <Func> + <Cap
Lock> keys.
Numbers Type numbers (0-9) by pressing the desired keys.
Secondary
characters
A yellow secondary character appears on the upper-right of
each text key. Type one by first pressing the <Func> key, then
press the desired secondary character key.
For all key combinations you must press the first key first.
Guide Plate
Lever
Material
Guide
Slots
Cutter Lever
Ï
