TLS2200
TM
Thermal Transfer Printer User’s Guide 5
!
battery pack charges as long as the charger is plugged in. Brady recommends that once the
battery pack is fully charged, you should unplug the charger and operate the printer solely
on battery power.
If the battery pack is completely discharged, connecting the charger does not provide
enough power to run the printer. Recharge the battery pack before continued use.
WARNING: Disposal of the Battery Pack
The NiCad battery pack contains cadmium, a toxic element. The battery pack is
considered hazardous toxic waste and must not be thrown away in the home or office
garbage. Once the useful life of the battery is ended (one to three years), contact your local
authorities for information regarding its proper disposal or recycling options.
Step 2. Install the Battery
1. Turn the battery power switch to the off
(O) position.
2. Slide the battery release lever to the
unlock position. (slide to left)
3. Drop the battery in as shown and slide
forward.
4. Slide the battery release lever to the lock
position. (slide to right)
Step 3. Turn the Power On
Turn battery power switch to the on (I)
position.
Battery
Power Switch
(I)=On
(O)=Off
Battery
Lever
