21
o If there is a power failure or the plug is pulled out of the
socket when a wash cycle is in progress. Once power has
been restored, the wash program will continue.
o Whilst the wash program is in progress, the time remaining to
the end of the wash cycle will show on the display.
o At the end of the program, the “Stop” indicator light with come
on. You should wait about 2 minutes for the door lock to be
released. The door lock indicator light (C) will go out.
o Switch off the machine by turning the program selection knob
(B) to the OFF position. Open the door and remove the laundry.
Turn off the water tap.
Cancelling or pausing a wash program
o To stop a wash program once a wash cycle is in progress, you
should press and hold the Start / Pause button (N) for about 2
seconds.
o To cancel the program, turn the program selection knob (B) to
the OFF position.
o If you wish to add or remove items the door will remain locked
for two minutes before it is possible to open the door.
o Close the door and press the Start / Pause button (N) to
continue the wash cycle.
Before opening the porthole door, you MUST
drain the appliance; otherwise there may still
be water in the drum when you open the
door.
Delay start feature
Your appliance has a delay start feature, which allows you to pause
the start of a wash cycle until a later time. You can delay the start
time by 3, 6 or 9 hours.
o Follow the process listed under “Selecting a wash program” on
pages 20-21.
o Before pressing the Start / Pause button (N), you should select
the length of time that you want to delay the wash program for
by pressing the delay start button (D). The relevant LED will
light on the display to show the set delay time.
