Installing the E1/FE1 WAN Adapter Module
302702-A Rev. 00
3
• For an 8-port ANH router, install the E1/FE1 WAN adapter module in the
back-panel WAN module slot 3 (Figure 3
).
See
Installing a WAN Adapter Module in a BayStack AN or ANH Router
.
Figure 3. E1/FE1 WAN Adapter Module Connector on an 8-Port ANH
2.
Connect the E1/FE1 cable to the RJ-48C connector in the installed
E1/FE1 WAN adapter module (Figure 4
).
Note:
The E1/FE1 input port shall operate with an interconnecting cable loss
within the range of 0 to 6 decibels (dB), measured at 1024 kilohertz (kHz).
COM 1
COM 2
COM 3/Expansion
AN0124B
Remote Alarm
E1/FE1
G.703
Local Alarm
Loop
Sync
