114113-B Rev. 00
xxi
About This Guide
If you are responsible for installing, starting, and operating a BayStack™ Access
Node (AN
®
) router or a BayStack Access Node Hub (ANH™) router, you need to
read this guide.
If you want to Go to
Physically install an AN or a 12-port ANH router and attach
communications equipment.
Chapter 1
Physically install an 8-port ANH router and attach
communications equipment.
Chapter 2
Connect the AN or ANH to the network using one of the software
configuration options.
Chapter 3
Operate the AN or ANH and interpret the LEDs. Chapter 4
Configure the AN or ANH for Netboot or Directed Netboot. Appendix A
Use Local Boot (the Quick-Start procedure). Appendix B
Review the AN or ANH technical specifications. Appendix C
Review the requirements for European operation. Appendix D
Note:
The 12-port ANH router has the same base module and connectors as
the AN router. The term AN, when used in this guide, includes the 12-port
ANH, unless stated otherwise. Instructions for the 8-port ANH router
generally differ and are described separately. The term AN/ANH, without
reference to ports, means the AN, the 12-port ANH, and the 8-port ANH.
