Upgrading Version 7-9.xx Routers
117404-A Rev. A E-3
Upgrading Routers from Router Software Version 10.0 to
BayRS Version 12.00
To upgrade from Version 10.0/4.0 to BayRS Version 12.00 and Site Manager
Version 6.00 using Site Manager:
1. Upgrade your PC or UNIX workstation to Site Manager Version 6.00.
See Task 1: Upgrading to Site Manager Version 6.00 on page 3-2.
2. Transfer the Version 12.00 software image and router files (including
PROMs) to your Site Manager workstation or PC.
See “Task 1: Upgrading to Site Manager Version 6.00” on page 3-2.
3. Customize the Version 12.00 software image using Image Builder.
See “Task 3: Customizing the Router Software Image” on page 3-10.
4. Transfer the Version 12.00 image and PROM files to the router’s flash
card.
See “Task 2: Transferring a Customized Image and Router Files to the
Router” on page 4-5.
5. Using the Technician Interface, upgrade the PROM files, if necessary.
See “Task 3: Upgrading and Verifying PROMs on the Router” on page 4-10.
6. Exit from the router and install any required hardware.
7. Start the router and boot it using the 12.00 software image and the
Version 10.0 configuration file.
See “Task 1: Booting the Router with the Customized Image” on page 5-1.
8. Save the configuration file using its old file name.
See “Task 2: Upgrading the Existing Configuration File” on page 5-4.
This saves the configuration file in the router’s memory and saves it to the
router’s flash card with a Version 12.00 MIB stamp.
You now have a Version 12.00 software image and configuration file on the
router’s flash card.
