Upgrading Routers from Version 7-11.xx to Version 12.00
E-2 117404-A Rev. A
After you upgrade to Router Software Version 10.0 and Site Manager 4.0, you
must now upgrade Version 10.0/4.0 to BayRS Version 12.00 and Site Manager
Version 6.00. Go on to “Upg
rading Routers from Router Software Version 10.0 to
BayRS Version 12.00.”
3. Upgrade to Router Software Version 10.0 “Task 2: Upgrading to BayRS Version
12.00” on page 3-6.
4. Customize the Router Software Version
10.0 software image using the Image
Builder.
“Task 3: Customizing the Router Software
Image” on page 3-10.
5. Transfer the router software image
(Version 7.x, 8.x, or 9.x) and Boot and
Diagnostic PROM files to your
workstation or PC.
“Task 2: Transferring a Customized Image
and Router Files to the Router” on
page 4-5.
6. Using the Technician Interface, upgrade
the Boot and Diagnostic PROMs on the
router.
“Task 3: Upgrading and Verifying PROMs
on the Router” on page 4-10.
7. Boot the router using the Version 10.0
customized image and the existing
configuration file.
“Task 1: Booting the Router with the
Customized Image” on page 5-1.
8. Save the Version 10.0 configuration file to
the router’s flash card.
This writes the configuration file in the
router’s memory and saves it to the
router’s flash card with a Version 10.0
MIB stamp.
You now have a Version 10.0 software
image and configuration file on the
router’s flash card.
“Task 2: Upgrading the Existing
Configuration File” on page 5-4.
Table E-1. Upgrading Routers from Version 7-9.xx to Version 10.0
To Do This Refer to Chapter
