Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit www.motorola.com/us/support for FAQs and additional product documentation. 12
5. Click the Connection Type menu and click the type of ADSL service
that your service provider is providing, then perform the following
steps based on that connection type:
PPPoE or PPPoA: Enter your PPP user name and password, pro-
vided to you by your DSL service provider. Remember, you may
need to call your DSL provider for this information.
DHCP Client: Proceed immediately to step 6.
QuickStart Broadband Configuration Page
6. Click the Finish button.
The 2247-N8 shows a progress bar as it waits for the DSL network
connection to initialize. If the DSL network connection cannot initial-
ize, you may be prompted to re-enter your PPP user name and pass-
word.
After the waiting period, the browser updates to show the Connec-
tion Information
page. If the broadband status is listed as “Up”, the
connection to the provider DSL network was successful. Seeing the
current network status may require refreshing the browser window.
Close any open browser windows once the broadband connection is
active.
TIP: If you are having trouble connecting, enter your information again
and make sure the Caps Lock key on your computer is not on. If your ser-
vice provider network uses another broadband connection method (static
IP assignment or DHCP), or if the automatic detection of DSL settings did
not succeed, you may need to use the advanced configuration options:
“How to configure a Point to Point Protocol (PPPoE or
PPPoA) broadband connection:” on page 47.
“How to configure a DHCP Client assignment broadband
connection:” on page 48.
“How to configure an assigned Static IP broadband connec-
tion:” on page 49.
If you are still having trouble, go to “Frequently Asked Questions - and
Answers (FAQs)” on page 105 or “Basic Troubleshooting” on page 107.
7. Open a new Web browser and enjoy your Internet access through the
Motorola 2247-N8 DSL Wi-Fi Gateway!
Wired (Ethernet) Network Setup (Continued)
