1. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback
may not be possible. If moisture forms on the
disc, wipe it off with a soft cloth. If moisture
forms on the optical parts of the player, do not
use the player for about one hour. The con-
densation will disappear naturally allowing
normal operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3. When the auto antenna cord is connected to
the car auto antenna cord, when the unit is
switched to the radio mode (or the TV mode),
the antenna is extended automatically. If the
car is in a narrow space, the antenna may
strike something, so be careful.
4. This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
l Insert the unit all the way in until it is fully locked
in place. Otherwise it may fall out of place when
jolted.
l When extending the ignition, battery, or ground
wires, make sure to use automotive-grade wires
or other wires with a 0.75mm2 (AWG18) or more
to prevent wire deterioration and damage to the
wire coating.
l To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
l If the unit starts to emit smoke or strange smells,
turn off the power immediately and consult your
dealer.
l Make sure not to get your fingers caught be-
tween the faceplate and the unit.
l Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it con-
tains glass parts.
l Do not touch the liquid crystal fluid if the LCD
is damaged or broken due to shock. The liquid
crystal fluid may be dangerous to your health
or even fatal.
If the liquid crystal fluid from the LCD contacts
your body or clothing, wash it off with soap im-
mediately.
l Make sure to ground the unit to a negative 12V
DC power supply.
l Do not open the top or bottom covers of the
unit.
l Do not install the unit in a spot exposed to di-
rect sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possi-
bility of water splashing.
l Do not subject the faceplate to excessive shock,
as it is a piece of precision equipment.
l When replacing a fuse, only use a new one with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
l To prevent short circuits when replacing a fuse,
first disconnect the wiring harness.
l Do not place any object between the faceplate
and the unit.
l Do not use your own screws. Use only the
screws provided. If you use the wrong screws,
you could damage the unit.
l Do not apply excessive force to the open face-
plate or place objects on it. Doing so will cause
damage or breakdown.
8
DB625MP
1.
When the inside of the car is very cold and
the player is used soon after switching
on
the
heater moisture may form
on
the disc or the
optical parts of the player and proper playback
may not
be
possible. If moisture forms on the
disc, wipe it off with a soft cloth.
If
moisture
forms on the optical parts of the player, do not
use the player for about one hour. The con-
densation will disappear naturally allowing
normal operation.
2.
Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3.
When the auto antenna cord
is
connected to
the car auto antenna cord, when the unit
is
switched to the radio mode (or the TV mode),
the antenna
is
extended automatically. If the
car
is
in
a narrow space, the antenna may
strike something, so
be
careful.
4.
This unit uses a precision mechanism. Even
in
the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
• Insert the unit all the way
in
until it
is
fully locked
in
place. Otherwise it may fall out of place when
jolted.
• When extending the ignition, battery, or ground
wires, make sure to use automotive-grade wires
or other wires with a
O.75mm
2
(AWG18) or more
to prevent wire deterioration and damage to the
wire coating.
•
To
prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
•
If
the unit starts
to
emit smoke or strange smells,
turn off the power immediately and consult your
dealer.
• Make sure not to get your fingers caught be-
tween the faceplate and the unit.
• Be careful not
to
drop the unit or subject it
to
strong shock.
The unit may break or crack because it con-
tains glass parts.
8
DB625MP
•
Do
not touch the liquid crystal fluid if the LCD
is damaged or broken due to shock. The liquid
crystal fluid may
be
dangerous to your health
or even fatal.
If
the liquid crystal fluid from the LCD contacts
your body or clothing, wash it off with soap im-
mediately.
• Make sure
to
ground the unit
to
a negative 12V
DC
power supply.
• Do not open the top or bottom covers of the
unit.
•
Do
not install the unit
in
a spot exposed to di-
rect sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possi-
bility of water splashing.
•
Do
not subject the faceplate
to
excessive shock,
as it
is
a piece of precision equipment.
• When replacing a fuse, only use a new one with
the
prescribed rating. Using afuse with
the
wrong
rating may cause your unit
to
malfunction.
•
To
prevent short circuits when replacing a fuse,
first disconnect the wiring harness.
• Do not place any object between the faceplate
and the unit.
•
Do
not use your own screws. Use only the
screws provided.
If
you use the wrong screws,
you could damage the unit.
•
Do
not apply excessive force
to
the open face-
plate or place objects on it. Doing so will cause
damage or breakdown.
