EZPi1000 User Manual
jack is for the dispenser, the
upper jack for the cutter.
6. Install the cutter by
pressing down first its
left-hand side and then
its right-hand side.
7. Fold out the cutter as
shown in the illustration.
8. Secure the cutter using
the screws provided for
this purpose.
9. Once you have secured
the cutter with the
screws, fold it back in
again.
10. Pass the labels through
the guides.
11. Close the print
mechanism.
【
Note
】
We advise against using inside
wound label stock.
