• Remove the power supply cable and the drain-
ing and inlet hose from the hose holders ( C ) on
the rear of the appliance.
•
Unscrew the three bolts ( A ) and remove the
hose holders ( C ).
•
Slide out the relevant plastic spacers ( B ).
• Plug the smaller upper hole and the two large
ones with the corresponding plastic plug caps.
Positioning and levelling
x 4
Level the appliance by raising or lowering the feet.
The appliance MUST be level and stable on a flat
hard floor. If necessary, check the setting with a spi-
rit level. Any necessary adjustment can be made
with a spanner.
7
