To activate this device,
rotate the button (with-
out pressing it) inside
the door clockwise until
the groove is horizontal.
If necessary use a coin.
To disable this device
and restore the possibili-
ty of closing the door, ro-
tate the button anti-clock-
wise until the groove is
vertical.
Frost precaution
If the appliance is installed in a place where the tem-
perature could drop below 0°C, proceed as follows to
remove any water remaining inside the appliance:
1. unplug the appliance;
2. turn off the water tap;
3. unscrew the water inlet hose from the tap;
4. unscrew the drain hose from the rear support and
unhook it from sink or spigot;
5. place a bowl on the floor;
6. let the drain hose run along the floor, place the
external extremities of the drain and inlet hoses
in the bowl placed on the floor and let water drain
out completely;
7. screw the water inlet hose to the tap and the
drain hose to the rear of the appliance again;
When you intend to start the appliance up again,
make sure that the room temperature is above 0°C.
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local council, your
household waste disposal service or the shop where
you purchased the product.
Packaging materials
The materials marked with the symbol are recycla-
ble.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
4
