GB 15
INSTALLATION
Removal of transport bracket
The appliance is fitted with a transport bracket to avoid any
possible damage during transport.
Before using the appliance, the transport bracket at the
back MUST be removed.
1.
Unscrew the two screws
A
and the four screws
B
with a flat
screwdriver or a No.8 hex nut box spanner.
2.
Remove the transport bracket.
3.
Replace the four outer screws B on the machine and tighten
them.
4.
Remove the two seals C from the hose holder and clip them into
the openings of the machine D.
Note: do not forget to replace and tighten the four outer
screws.
2
1
1
4
C
A
B
D
1
4
D
4gb10037.fm Page 15 Thursday, August 5, 2004 6:55 PM
