HOW TO MAINTAIN THE WASHING MACHINE
Cleaning the drain pump
This machine is provided with a self-cleaning pump.
In case of pump obstruction (due to trapped foreign
objects: like coins, button etc.) you will notice that
the machine will not drain completely.
Proceed as follows:
1. Place the drain hose in a basin at floor level, to
evacuate the water.
2. Pull the lever of the trolley from left to right
(depending on the model).
3. Open the pump cover with a flat tool. The pump is
now visible.
4. Unscrew the pump filter (counter - clockwise) and
place a floor cloth under the pump to collect
water from the pump.
5. Clean the filter and inner space of the pump and
replace the pump filter.
6. Replace the pump cover and the lever of trolley
(depending on the model) to its original position.
How to remove any object stuck between the tub
and the drum
The machine is provided with a removable lifter
situated opposite the drum flaps which may be
removed to take out any object stuck between the
tub and the drum.
1. Remove the laundry from the drum and close the
drum flaps. Turn the drum by half a (according to
programme)revolution and two oval openings
will appear (covered by the plastic lifter).
2. Push the plastic button on the lifter and slide the
lifter to the right. The lifter will fall into the
drum.
3. Turn the drum so that the drum flaps are accessi-
ble from the top.
4. Open the flaps and remove the lifters. The
opening in the drum bottom allows the objects to
be removed.
5. To replace the lifter reverse all the above opera-
tions.
52
