CLIO II, TWINGO, KANGOO, TRAFIC, MASTER & MASCOT IR AND RF RESYNCHRONISING ( KRS )
! AFFEKTS VEHICLES WITH: M2 DECODER, MULTI-TIMER DECODER
SYNCHRONISING REQUIRED TO UNLOCK IMMOBILISER AND START VEHICLE: NO
FIXED OR ROLLING KODE: ROLLING
1. Turn Ignition ON then OFF.
2. Press the CDLB for more than 5 seconds. The door should lock then unlock and/or the IMMOLED illuminates .
3. When this happens, 10 seconds is allowed.
4. Press the PLIP button twice, the doors should lock and unlock.
5. Check that the PLIP unlocks and locks the doors.
6. Repeat point 1-5 for other remotes if required.
END
ESPACE III (JE) IR RESYNCHRONISING ( KRS )
SYNCHRONISING REQUIRED TO UNLOCK IMMOBILISER AND START VEHICLE: NO
FIXED OR ROLLING KODE: ROLLING
1. Turn Ignition ON then OFF.
2. Press the CDLB for more than 5 seconds. The doors should lock then unlock and/or the IMMOLED illuminates .
3. When this happens, 15 seconds is allowed.
4. Press the 1st PLIP once (doors lock/unlock)
5. Press the 2nd PLIP once (doors lock/unlock)
END
ESPACE III (JE), AVANTIME RF RESYNCHRONISING ( KRS )
SYNCHRONISING REQUIRED TO UNLOCK IMMOBILISER AND START VEHICLE: NO
FIXED OR ROLLING KODE: ROLLING
1. All doors closed, ignition ON then OFF
2. Press the CDLB (in roof console) until doors lock/unlock, Within 15 seconds, complete next steps
3. Press the 1st PLIP once (doors lock/unlock)
4. Press the 2nd PLIP once (doors lock/unlock)
! NOTE:
- If the BII central electronics is configured for 2 keys (PLIPS) this will not work unless you have both
PLIPS and resynchronise them both in one procedure.
- The RF receiver is located in the instrument panel and if you are to program your keys on a second hand
instrument panel this will not work. Either you need the RF sender (PLIP) from the other car or you will have to
live without RF keys (PLIPS) as the instrument panel PLIP recognition cannot be re-programmed once they have
been programmed first time.
END
VDIAG.COM
