Display
The external display no
longer displays properly
When an external display not compatible with the power saving mode is used with the
computer, the external display may no longer display properly when the computer enters the
condition the power of the display is OFF (for energy conservation purposes). In such
cases, turn off the power to the external display.
When the screensaver is set,
an error will occur during a
resume operation
When the computer automatically enters the standby or hibernation mode while the
screensaver is running, an error may occur during a resume operation. In such cases, turn off
the screensaver or try changing the pattern of the screensaver.
An error occurs or the com
puter freezes while using
Oualview
If you use a 3D screen saver while in Dualview mode at a high resolution, an error may
occur or the computer may freeze. Under these conditions, do not use a 3D screen saver.
Fast User Switching function ШШШШШ
Some applications may not
work properly
When switching to a different user with the Fast User Switching function, the following
problems may occur.
• Some applications may not work properly (for example, PDF files may not be printed
properly).
• It may not be possible to set the settings of the display.
• A serial mouse may not work.
• C Fn ) + C F31 may not work.
• B’s CLiP icon will not be shown on the taskbar.
If any of the above occur, log on with the administrator authority again, not using the Fast
User Switching function, and try the operation once more.
Battery Indicator
The red indicator lights
The battery level is very low (the charge is less than approx. 9% capacity).
Connect the AC adaptor. You can use the computer when the indicator light is orange. If you
do not have an AC adaptor, save your data and power off your computer. After replacing the
battery pack with a fully charged one, turn your computer on.
The red indicator blinks
Quickly save your data and power off your computer. Remove the battery pack and discon
nect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support. The battery pack or recharg
ing function may be defective.
The orange indicator blinks
Battery cannot be recharged temporarily because the internal temperature of the battery pack
is outside of the acceptable temperature range for recharging. Once the allowable range re
quirement is satisfied, charging begins automatically. Your computer can be used normally.
Reference Manual
The Reference Manual is
Is Acrobat Reader installed?
not displayed
If Acrobat Reader is not installed, run [c:\util\reader\ar505enu.exe] in [start] - [Run] to rein
stall the program. When installing the program, do not change the installation destination
folder. If the destination folder is changed, the Reference Manual cannot be opened from
the [start] menu.
23
