Dil ID: 7
Dil Adı: french
Dil Kodu: fr8tayfun Produits de la Marque Mitsubishi Electric
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



Chapter 2. TV Connections 23
Name assigned
to the device
Figure 3. The ClearThought Auto Input Sensing screen for
IEEE 1394 devices includes a check box for an associated
analog connection.
IfyourIEEE1394devicehasananalogconnectiontothe
TV,followtheinstructionsbelow.
1. ConnectthedevicetotheTVwith an IEEE 1394
cable first.
2. WhentheNew1394Devicescreenappearswiththe
Analog Connectioncheckboxhighlighted,press
ENTER
toenteracheckmark.Seefigure3,New1394
Devicescreen.
Note: It is important to check mark the box when
this screen appears upon first connecting the
Digital Video and Home Recording
Thetablebelowwillhelpyoudecidewhichtypeofconnectiontousefordigitalvideo.Digitalvideocomestoyour
homeinacompressedstate,whetherreceivedonrecordedmedia(e.g.,disc)orbroadcastovertheair,overcable,or
viasatellite.Somecompresseddigitalvideoisavailableforrecordingasnotedinthetable.
Connection Type into the TV
Effect on Home Recording
HDMI or DVI
Compressedvideoisconvertedto
uncompressedformbyanexternaldevice
suchasacablebox,satellitereceiver,or
DVDplayerbeforeitissenttotheTVonan
HDMIorDVIcable.
YoucannotrecordtheresultantuncompressedvideosenttotheTV
viaHDMIorDVI.
IEEE 1394 (FireWire®) Connections
YourTVcanreceiveanddecodedigital
channels,MPEG2compresseddigitalvideo,
andDolbyDigitalaudio.
Youcanrecordcompresseddigitalvideoeither
• oncompatibledigitalrecordersasdigitalsignalsusingIEEE1394
connections
• convertedtoanalogsignalsandrecordedasstandard-definition
compositevideofromthe
MONITOR OUT
jack
Youmaybeunabletorecordsomeprogrammingbecauseofcopyrestric-
tionsaddedbythecontentowners.
device,aslaterchangescanonlybemadeafter
returningallTVsettingstotheirdefaults.
3. IntheNew1394Devicescreen,notethename
assignedtothedevice,asyouwillneedtousethe
samenameinalaterstep.Seefigure3.
4. ConnectthedevicetotheTVwiththesupplemental
analogcables.
5. ThenextscreenistheAutoInputSensingscreen
(seefigure2)inwhichyoucanselectanameforthe
device.SelectthesamenameyounotedintheNew
1394Devicescreen(seefigure3).
• Ifyouselectthewrongnameforthedevice,you
willbeunabletoswitchbetweentheanalogand
digitalinputstotheTV.
• IfyouconnectanIEEE1394cableboxandit
isdetectedasCABLEintheNew1394Device
screen,besuretoselectthenameCABLE asthe
namefortheanaloginputand notcablebox.
To Add an Analog Connection at a Later Time (not
recommended)
1. DisconnecttheIEEE1394devicefromtheTV.
2. ResetallTVsettingstotheirdefaultsusingtheTV
Resetservicemenuasfollows:
a. Press
MENU
todisplaytheMainmenu.
b. Press
1 2 3
toopentheResetservicemenu.
c. Press
ENTER
.
3. ReconnecttheIEEE1394devicetotheTV,usingthe
IEEE1394cablefirst.
4. WhentheTVrecognizesthedevice,placeacheckin
theAnalog Connectioncheckbox.
5. Press
EXIT
.
Before You Begin, continued