1188 UUssiinngg tthhee OOppttiiEECC PPrroo PPrriinntteerr 66 wwiitthh WWiinnddoowwss
normally use for your publishing because different brands
of discs may vary slightly in size. Also, verify that the
printer is powered ON and that it is connected to your
computer.
2. Click on the Properties button. Click Yes to
preform the test print. (Later, if you want to
enter an adjustment without printing a test print,
click No.) The printer will begin printing the calibration test
print.
3. When the print is complete, rotate disc 180º and put the
disc back in the input bin and repeat step 2 using the same
disc.
4. When the second run of the print is compete, you should
have a test print that looks something like the following:
5. Along the Vertical axis of the printed disc, find the number
whose lines touch. For example, in the above illustration,
the number would be 2. Enter that number into the Vertical
box of the Calibration window and 0 would be entered for
the Horizontal axis.
and print again.
